Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Swing the support arms under the vehicle and pull out the front section until the support plate is centered
under the original lifting points. Then unscrew the support plate until the lifting point is reached. Use an
adapter if necessary.
Attention
Observe the maximum height of 250 mm or the maximum height of a support plate
adapter.
Lifting
1. Raise the jack by means of the lift pedal.
2. Raise the car to a height of 100-150 mm and stop lifting by releasing the lift pedal.
3. Check if the car is safely on the lift and has been secured against rolling away.
4. Then continue lifting the car and observe the lifting process.
Parking
1. By activating the locking pawl and pressing the lowering pedal, the jack lowers to the nearest notch. Ensure
that the height is uniform.
Tip
The park position reduces the pressure on the hydraulic cylinders and hoses, thus
increasing the service life and reducing wear on the lift.
Lowering
1. Before lowering, check whether there are any objects under the car.
2. Unlock the locking pawls. If necessary, the axle-free jack must be raised slightly beforehand.
3. Press the lowering pedal until the zero point is reached.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
52
Release date: 16.11.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
Werbung
