Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
INSTALLATION
The machine must be installed by authorized personnel in accordance with the instructions.
Note
The operating instructions (including protocol) are an important part of the machine or
product.
Please keep it in a safe place!
The product must be inspected by a suitable and authorized company or institution after completion of
assembly, handover, instruction if necessary, and subsequently at regular intervals in accordance with the
regulations and legal provisions in force in the country of operation.
2.1
Transport and storage conditions
For transport and positioning of the machine always use suitable slinging, lifting or floor conveying equipment
and pay attention to the center of gravity of the machine.
The machine should only be transported with the original packaging.
Data
Weight
Width
Length
Height
Storage temperature
Transport and storage instructions
Warning
Lift carefully, support the load properly with suitable aids that are in perfect condition.
Avoid unexpected elevations and jerks. Be careful of unevenness, cross gutters, etc.
Keep the removed packaging parts in a collection place inaccessible to children until disposal.
2.2
Unpacking the machine
Remove the top cover of the packaging and make sure that no damage has been caused during transport.
Remove the securing bolt to remove the machine from the pallet/frame. To lift the machine down from the
pallet/frame, use a suitable lifting device (possibly with sling rope).
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
Release date: 16.11.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
170 kg
600 mm
920 mm
340 mm
-10 to +40°C
47
Werbung
