Eaton CROUSE-HINDS Serie Betriebsanleitung Seite 7

Code Zone 1
3-pole + PE 3-pole +N + PE
GHG 515, 3-pole + PE 50/60Hz
220-250V 380-415V 500V
blue red black
GHG 515, 4-pole + PE 50/60Hz
220-250V 380-415V 500V
blue red black
Dimensions in mm
X = fixing dimensions
Plug
Wall socket
Explosion-protected plugs and sockets 125 A, GHG 515
1 Technical data
1.1 Plug and socket GHG 515
EC-Type Examination Certificate:
Marking acc. to 2014/34/EU
and standard of series EN 60079:
IECEx certificate:
Category of application
standard of series IEC 60079:
Rated voltage:
Rated current:
Back-up fuse:
Switching capacity AC 3:
Perm. ambient temperature:
(Other temperatures possible for special versions.)
Perm. storage temperature in original packing:
**Protection category acc. to IEC/EN 60529
690V
with closed and secured hinged cover as well
black
as combinations properly plugged together
Insulation class acc. to IEC/EN 61140:
Cable entry:
Wall socket
suitable cables and test torques of the
pressure screw
Seal 1+2
1 2
690V
Seal 1
1 2
black
Test torque for screw in thread cable entry
(1) The tests of clamping ranges and torque values were performed with metal mandrel. The clamping range can
vary by using cables with different manufacturing tolerances and material properties. Please use a suitable
combination of seals in the intermediate area, so that the cap nut can be tightened in future maintenance
work on the cable entry.
Plug
Terminal
Wall socket:
Plug:
* (use cable lugs supplied) Observe current load!)
Min. cross section / Supply terminal
for 100 A rated current
for 125 A rated current
Test torques
Cover screws:
Terminals, plug:
Terminals, wall socket:
Self-cutting screws size 5:
Weight (standard version)
Wall socket:
Plug:
Auxiliary contact
Rated voltage:
Rated current:
Switching capacity:
PTB 01 ATEX 1069
gas
II 2 G Ex de IIC T6
dust
II 2 D Ex tD A21 IP66 T 80°C
IECEx BKI 04.0005
gas Ex de IIC T6
dust Ex tD A21 IP66 T 60°C**
up to 690 V, 50/60 Hz
max. 125 A
max. 125 A gG without thermal protection
max. 160 A gG with thermal protection
(therm. protection set to 125 A)
up to 690 V / 125 A
-20 °C to +40 °C (standard version)
-20 °C to +40 °C
IP 66 (catalogue version)
I- with metal cable entries
II - is complied with by devices
(standard version)
2 x M63
Ø
min. 29.0
3
max. (1)
35.0
min. 36.0
3
max. (1)
41.0
7 .5 Nm
Ø 21-48 mm (Ø 31-58 mm)
2 x 4 - 70 mm² (max 1x120 mm²)*
1 x 4 - 35 mm² with pin cable lugs 1x50 mm²
Wall socket
1x 50 mm²
1x 70 mm²
2.5 Nm
4.5 Nm
6.0 Nm
3.0 Nm (see page 10, fig. 3, pos5)
4-pole
approx. 12.30 kg
approx.
690 V AC
20 A
AC 15
DC 13
4-pole
5-pole
w/o auxiliary contact
Nm
12.0
12.0
12.0
13.0
Plug
1x 35 mm²
1x 50 mm²
5-pole
approx. 13.00 kg
0.90 kg approx. 1.20 kg
400 V / 6 A
24 V / 2 A
Contact arrangement
with auxiliary contact
GB
7