ABB STD-MTS Betriebsanleitung Seite 29

Operation
• Switch off: touch the operating element: The last adjusted
b. Parallel mode (Fig. 2) (Extension)
• Actuate operating element of the extension: All memory
touch controllers STD-MTS are switched or dimmed
simultaneously via the extension. Lighting facilities can
also be operated with a uniform brightness value.
• Hold down the operating element of the extension for
about 10 seconds.
- The lighting facilities are set to the maximum brightness
value and can be operated "synchronously" then.
brightness value will be stored and the lighting
facility will be switched off.
GB