clearaudio electronic Concept Signature Bedienungsanleitung Seite 9

User manual / Bedienungsanleitung
3.3
Take the platter out of the package and carefully
place it with both hands onto the shaft.
Make sure that the hollowed side faces down towards
the sub-platter.
3.4
Carefully remove the adhesive security tape and
other security materials from the tonearm and the
cartridge.
3.5
Please level the turntable using the level gauge
provided.
All key parameters have been adjusted at the
Clearaudio factory.
Made in Germany
Pic. 4: Placing the platter
Pic. 5: Removing the adhesive security tape
Pic. 6: Levelling the turntable
Loving music
Page / Seite 9