clearaudio electronic Concept Signature Bedienungsanleitung Seite 8

User manual / Bedienungsanleitung
3. Set-up
concept Signature
Setting up the
already assembled and all key parameters have been pre-adjusted and tested at the Clearaudio
factory.
concept Signature
The
3.1
concept Signature
First take the
of the package and place it on a suitable surface.
Then remove the drive belt from the plastic bag.
3.2
Place the drive belt around the sub-platter and
around the motor pulley and the tacho meter.
Page / Seite 8
turntable is easy. The turntable chassis, tonearm and cartridge are
turntable needs a set-up space of at least 17 x 14 inches.
turntable chassis out
Pic. 2: Placing the turntable
Pic. 3: Mounting the drive belt
© clearaudio electronic GmbH