clearaudio electronic Concept Signature Bedienungsanleitung Seite 10

User manual / Bedienungsanleitung
3.6
If the bubble of the level gauge is not centered
within the black circle, please turn the turntables
feet clockwise or anti-clockwise until you reach the
perfectly leveled position.
You will only get the best sound from your
Signature
turntable if it is perfectly leveled.
3.7
Connect one end of the external power supply
provided to the socket on the rear of the
Signature
turntable and the other end to a live AC
outlet.
Then connect the tonearm cable to your phonostage
(red plug = right channel, black plug = left channel).
Finally, connect the grounding and switch on the
device on the back using the "On/Off" switch.
concept Signature
Your
assembled and ready to play.
Clearaudio is wishing you a lot of pleasure with your new
Page / Seite 10
concept
concept
turntable is now completely
Lock screw
Pic. 7: Adjustment of the turntable feet
Pic. 8: Power supply of the turntable
concept Signature
© clearaudio electronic GmbH
turntable.