Werbung
Verfügbare Sprachen
Verfügbare Sprachen
forehand and if necessary, clean it with a bit of dish detergent and a clean
cloth. Fill fresh water into the water tank (3), before putting the appliance
back into operation.
• Every 2 weeks: First remove the water tank (3), the lid (7), the cover (16)
and the Water Cube™ (12). Clean the inside of the water tray (10,14,17)
thoroughly with a bit of dish detergent, warm water and a soft, clean
cloth, sponge or brush. Use diluted descaling agent (mix according to the
manufacturer's instructions) for lime deposits. Then rinse the water tray
(10) thoroughly with cold water and put the water tank (3), the lid (7), the
cover (16) and the Water Cube back in.
• Descaling at least 1x per month. Remove the water tank (3) the lid (7),
the cover (16) and the Water Cube (12). If limescale deposits form in the
water tray (10) we recommend using Stadler Form Cleaner & Descaler
(www.stadlerform.com/accessories). Alternatively, you can use a house-
hold decalcifier or vinegar. Fill a cup with 200 ml of tap water mixed with
descaling agent (mix according to the manufacturer's instructions). Pour
the liquid carefully into the water tray (10). Be sure that no liquid enters
the air outlet opening (13). This will damage the appliance and will void
any claim to the warranty.
• Let the descaling agent allow to take effect according to manufacturer's
instructions (approx. 30 min.). Check in the water tray (10) if the limescale
on the ultrasonic membrane (14) has dissolved.
• If limescale residue remains, the ultrasonic membrane (14) can be cleaned
with the help of the cleaning brush (15) (front- and backside). Do not try to
scrape them with a hard object.
• For stubborn limescale, we recommend descaling the appliance several
times in a row.
• To rinse, now fill the cup with 200 ml of tap water and carefully pour the
liquid into the water tray (10). Pour the water out of the appliance at the
front right corner. Repeat the process until there is no more descaling
agent in the water tray (10). Place the Water Cube (12), the lid (7), the
cover (16) and the water tank (3) back into the appliance.
• Regularly as required: For external cleaning, rub with a damp cloth and
then dry thoroughly. If the top of the lid (7) shows water and/or fragrance
deposits, please clean it using a damp cloth and a bit of dish detergent.
• At the end of the season: Before putting away the appliance at the
end of the season, decalcify as described above. Then clean it thoroughly
inside and out and let it dry completely. Insert a new Water Cube (12) and
anticalc cartridge (19, optional) in order for your appliance to be ready for
the start of the next season. Do not put the appliance away with a used
anticalc cartridge in place, as the granules inside will remain moist for a
long time.
Replacement of the anticalc cartridge (optional accessory)
• Please find the recommended replacement intervals in the table (see «Be-
fore setup»).
• Tip: The efficiency of the cartridge can be inspected with a simple test.
Hold a small mirror in the mist for a few seconds. If there are then white
deposits (calcium carbonate) on the mirror, then the cartridge needs
changing.
Werbung
