Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTING FURTHER CHANNELS
10 Select Scan Mode.
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
press »
« or »
V
and mark or unmark the »Free« and/or
»Scrambled« items.
11 Press » « (red) to start searching.
Notes:
When updating via the same satellites a
7
security query is displayed at the start of a
search.
If the previously stored channels should
7
be retained in the channel list and the new
channels found be added to it, then press
» « (green).
If » « (red) is pressed, the saved channels
7
will be deleted from the current channel list.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
– The search is complete as soon as the
message »Search is completed!« appears.
Note:
The search can be aborted with »EXIT«.
7
12 Switch to the Channel Editor with »
(yellow);
or
press »EXIT« to end the setting.
94 / 115 TR
« and press OK« to select
Λ
-----------------------------------------------------
Antenna settings for DiSEqC 1.0
and searching digital channels
from a satellite automatically
Note:
The following description about the LNB set-
7
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
<
>
»
« or »
3 Select the menu item »Source« with »
<
»
« and press »
– »Source« menu is active.
4 Select the line »Automatic Channel Search«
with »
« or »
V
confirm.
5 Select the option »Satellite (DVB-S/S2)«
with »
« or »
V
confirm.
6 Select the line »Antenna Settings« with »
or »
« and press »OK« to confirm.
Λ
– The »Antenna Settings« menu is dis-
played.
«
7 Select and set the required option for the
antenna settings with »
Satellite
Press »OK« then select the required satel-
lite with »
confirm.
LNB Type
Press »OK« then select the required LNB
Type with »
data and confirm with » « (green).
LNB Power
Set the LNB power to »Off«, »13/18V« or
»14/19V« depending on the LNB type by
<
using »
LNB selection
See DISEqC mode.
« and press »OK« to confirm.
« to confirm.
V
« and press »OK« to
Λ
« and press »OK« to
Λ
« or »
V
Λ
« or »
« and press »OK« to
V
Λ
<
>
« or »
«, enter the required
>
« or »
«.
Television / User Manual
«, »
«,
V
Λ
>
« or
«
V
«:
Werbung
