Beko B49L 8840 Bedienungsanleitung Seite 202

NETWORK SETUP
11 Select the line »Gateway« with »
Enter Gateway address with »1...0«.
12 Select the line »Select Access Point« with
» « or » « and press »OK« to confirm.
Λ V
– »Select Access Point« menu is displayed
by scanning available wireless networks.
13 Select the network that you want to connect
with » « or »
V
– Wireless connection password screen is
displayed.
Note:
For device to discover the wireless modem
7
on the network, the network name should
support ASCII characters.
14 Select the required character with »
<
» «, » « or »
Λ
character with »OK«.
– Using »Shift«
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
15 Confirm the password with » « (green).
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
16 Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
17 Press »EXIT« to end the setting.
88 / 115 TR
-------------------------------------------------------------------------------------------
«.
V
« and confirm with »OK«.
Λ
V
>
« and move to the next
»OK«, you can switch
Change TV Name
To make it possible to identify your TV in the
network, the name "Inter@ctive TV 4.0+" is as-
signed at the factory. You can change the name.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
<
» « or »
3 Select the menu item »TV« with »
and press »
– »TV« menu is active.
4 Select the line »About« with »
and press »OK« to confirm.
5 Select the line »TV Name« with »
» « and press »OK« to confirm
Λ
«,
6 Delete the current name step-by-step with
» « (red).
7 Select the required character with »
<
» «, »
Λ
character with »OK«.
– Using »Shift«
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
8 Confirm the new name by pressing » «
(green).
9 Press »EXIT« to end the setting.
>
« and press »OK« to confirm.
« to confirm.
V
V
>
« or » « and move to the next
»OK«, you can switch
Television / User Manual
«, » «,
V Λ
« or » «
V Λ
« or » «
Λ
« or
V
«,
V