Herunterladen Diese Seite drucken

Beko B49L 8840 Bedienungsanleitung Seite 131

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INITIAL SET-UP
The television set is fitted with an "installation as-
sistant", which guides you step by step through
the basic settings.
Using the screen dialogue, the user guide
enables supposedly complex settings and data
entries to be presented simply and clearly for
everybody.
Pages and dialogue items appear on the screen,
which identify the subsequent and likely operat-
ing steps.
To support this, you will also see the required
button symbols of the remote control.
The basic settings in detail:
– language selection
– country selection;
– choice of user mode;
– location selection;
– accessories selection;
– network settings (if desired);
– Station settings (DVB-S, DVB-T, DVB-C and
analogue channels).
The detailed settings can be found on pages 19
and 22.
Settings for connecting to the
home network
Depending on the connection to the home net-
work, you connect your television to the home
network:
– via a LAN connection or
– without cable via WLAN
There are two options with the LAN-connection:
Automatic connection
all data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
Manual connection
all data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
must be configured manually.
Television / User Manual
---------------------------------------------------------------------------------------------------
There are various options when using WLAN:
Automatic connection
Manual connection
Tuning channels
Depending on the type of antenna connected,
you can decide which channels you would like
the television to search for.
DVB-S – Tunes digital channels from the
DVB-C – For setting up digital cable channels
DVB-T – For setting up digital terrestrial
Searching for Analog television channels,
all data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
Depending on the router, you can use the fol-
lowing options:
– Option "WPS-PBC" (Push Button Configura-
tion);
– Connecting with a WPS PIN;
– Connecting by entering the network pass-
word.
all data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
must be configured manually.
satellite, from page 21.
You have two options for this search:
– the basic installation which presets a stan-
dard selection, e.g. the satellite Astra 19.2°
East; you need only start the search;
– the professional installation, which allows
you to make all required settings and set
parameters for your receiver system.
see page 21.
channels see page 22.
see "Setting further channels" section on page
98 .
Note:
See "Setting further channels"" section start-
7
ing from page 90 for more information on
digital television channel settings.
17 / 115 TR

Werbung

loading