Beko B49L 8840 Bedienungsanleitung Seite 197

NETWORK SETUP
Manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Adress«, »Netmask«, »Gateway« and
»DNS« values (IPS) from your Internet Service
Provider.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select the menu item »Network« with »
<
» « and press » « to confirm.
V
– »Network« menu is active.
4 Select the line »Change Connection Type«
» « or » « and press »OK« to confirm.
V Λ
5 Select the option »Wired« with »
and press »OK« to confirm.
6 Select the line »Network Configuration«
with » « or » « sand use »
V Λ
select »Manual«.
– »IP Address«, »DNS«, »Netmask« and
»Gateway« options are active.
Settings > Network
Picture Sound Source
Change Connection Type
Network Configuration
Wake-on-LAN
IP Address
DNS
Netmask
Connect Test Connection Change Area
7 Select the line »IP Address« with »
Enter IP address with »1...0«.
8 Select the line »DNS« with »
Enter IP address with »1...0«.
9 Select the line »Netmask« with »
Enter Netmask address with »1...0«.
10 Select the line »Gateway« with »
Enter Gateway address with »1...0«.
Television / User Manual
-------------------------------------------------------------------------------------------
«, » «,
V Λ
>
« or
« or »
V Λ
< >
« or » « to
Tuesday
xx xxx xxxx
TV Network Timer
Wired
Manual
Off
192 . 168 . 000 . 200
192 . 168 . 000 . 254
250 . 250 . 250 . 200
Input Mode Back Exit
BACK EXIT
«.
V
«.
V
«
V
«.
V
11 With » « (red) select »Connect« option to
establish modem connection.
– »Connecting... Please wait« message will
be displayed, and if the connection is
successful, Connection to Gateway: Suc-
cessful« message will be displayed.
12 Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success-
ful« message will be displayed.
13 Press »EXIT« to end the settings.
«
83 / 115 TR