Technical Requirements - Beko B49L 8840 Bedienungsanleitung

NETWORK SETUP

Technical requirements

Most of the home networks are Dynamic. If
you have a dynamic network, you must use a
DSL modem that supports DHCP. Modems and
IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatical-
ly, and thus you are not required to enter those
values manually.
Wireless WPS network connection
through by pressing a button
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select the menu item »Network« with »
<
» « and press » « to confirm.
V
– »Network« menu is active.
4 Select the line »Change Connection Type«
with » « or » « and press »OK« to
V Λ
confirm.
5 Select the option »Wireless WPS« with »
or » « and press »OK« to confirm.
Λ
– WiFi warning message will be displayed.
6 Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
press »OK« to confirm.
7 Select the line »WPS Type« with »
» « and select the option »Push Button«
Λ
< >
with » « or » «.
Settings > Network
Picture Sound Source
Çhange Connection Type
WiFi
WPS Type
Select Access Point
Network Configuration
Wake-on-LAN
Connect Test Connection Change Area
8 With » « (red) select »Connect« to establish
modem connection.
– »Push the WPS button on your Access
Point« message is displayed.
9 Press the WPS button on the router.
Television / User Manual
-------------------------------------------------------------------------------------------
«, » «,
V Λ
>
« or
V
< >
« or » « and
« or
V
Tuesday
xx xxx xxxx
TV Network Timer Parental
Wireless WPS
On
Push Button
N/A
Auto
Off
Input Mode Back Exit
BACK EXIT
10 To continue after pressing the WPS button
on the access point, select the option »Con-
<
tinue« with »
confirm.
– The "Connection to Gateway: Success"
message will be displayed.
11 Press » « (green) to make sure that the
network connection is established with the
current settings.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
12 Press »EXIT« to end the setting.
Wireless WPS network connection with
PIN
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select the menu item »Network« with »
«
<
» « and press »
– »Network« menu is active.
4 Select the line »Change Connection Type«
with » « or »
V
confirm.
5 Select the option »Wireless WPS« with »
>
or » « and press »OK« to confirm.
– WiFi warning screen will be displayed.
6 Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
press »OK« to confirm.
7 Select the line »WPS Type« with »
» « and select the option »PIN« with »
Λ
>
or » «.
Settings > Network
Picture Sound
Çhange Connection Type
WiFi
WPS Type
Select Access Point
Network Configuration
Wake-on-LAN
Change Area Change Mode
>
« or » «and press »OK« to
«, »
V
« to confirm.
V
« and press »OK« to
Λ
<
« or »
« or
V
Tuesday
xx xxx xxxx
Source TV Network Timer Parental
Wireless WPS
On
PIN
N/A
Auto
Off
BACK Back
85 / 115 TR
«,
Λ
>
« or
<
«
>
« and
<
«
EXIT Exit