Beko B49L 8840 Bedienungsanleitung Seite 134

INITIAL SET-UP
Connecting to a home network with a
LAN cable
11 Confirm »Change Connection Type« with
»OK«.
12 Select the option »Wired« with »
and press »OK« to confirm.
Note:
The settings for a manual LAN connection
7
are on page 83.
13 Press » « (red) to select »Connect« option to
establish modem connection.
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
14 Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
15 To switch to »Source« menu press »
(blue).
Note:
Continue searching for TV channels with:
7
– point 25 for DVB-S reception;
– point 29 for DVB-C reception;
– point 34 for DVB-T reception.
Connecting automatically by entering
the network password
16 Confirm »Change Connection Type« with
»OK«.
17 Select the option »Wireless« with »
» « and press »OK« to confirm.
Λ
18 Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
press »OK« to confirm.
20 / 115 TR
---------------------------------------------------------------------------------------------------
19 Select the line »Select Access Point« with
« or » «
V Λ
20 Select the network that you want to con-
21 Select the required character with »
22 Confirm the password with » « (green).
23 Press » « (green) to check the performed
«
24 To switch to »Source Setup« menu press
« or
V
< >
« or » « and
» « or » « and press »OK« to confirm.
V Λ
– »Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu.
nect with » « or »
V Λ
confirm.
– Wireless connection password screen is
displayed.
< >
» «, » « or » « and move to the next
Λ
character with »OK«.
– Using »Shift« »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
» « (blue).
Note:
Continue searching for TV channels with:
7
– point 25 for DVB-S reception;
– point 29 for DVB-C reception;
– point 34 for DVB-T reception.
Television / User Manual
« and press »OK« to
«,
V