Beko B49L 8840 Bedienungsanleitung Seite 204

SETTING FURTHER CHANNELS
Searching for all digital channels
from a satellite automatically
New satellite channels are added or satellite
data is changed frequently. Therefore, we rec-
ommend you to run auto search function from
time to time.
All transponders are scanned for new channels.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select the menu item »Source« with »
<
» « and press »
– »Source« menu is active.
Settings > Source
Picture Sound
Automatic Channel Search
Manual Channel Search
Channel Editor
Advanced
Change Area Select
4 Select the line »Automatic Channel Search«
with » « or »
V
confirm.
– Menu is displayed.
5 Select the option »Satellite (DVB-S/S2)«
with » « or »
V
confirm.
6 Confirm the push button »Continue« with
» « (blue).
7 Select the Channel Type.
Press » « or »
V
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (Digital + Radio) and press »OK« to
select and mark or unmark the »Digital«
and/or »Radio« items.
90 / 115 TR
«, »
V
« to confirm.
V
Tuesday
xx xxx xxxx
Source TV Network Timer Parental
Back
BACK
« and press »OK« to
Λ
« and press »OK« to
Λ
« to select whether you
Λ
-----------------------------------------------------
8 Select Scan Mode.
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
press »
V
and mark or unmark the »Free« and/or
»Scrambled« items.
9 Press » « (red) to start searching.
«,
Notes:
Λ
When updating via the same satellites a
7
security query is displayed at the start of a
>
« or
search.
If the previously stored channels should
7
be retained in the channel list and the new
channels found be added to it, then press
» « (green).
If » « (red) is pressed, the saved channels
7
will be deleted from the current channel list.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
– The search is complete as soon as the
message »Search is completed!« appears.
Exit
EXIT Note:
The search can be aborted with »EXIT«.
7
10 Switch to the Channel Editor with »
(yellow);
or
press »EXIT« to end the setting.
« or » « and press OK« to select
Λ
Television / User Manual
«