Datastation Maxi Z.ul; Canceling A Trekstor; Coupled To A Combination - TrekStor DataStation maxi z.ul Handbuch

4.4) Mounting a coupled TrekStor

DataStation maxi z.ul

• To mount a
DataStation maxi z.ul
the primary
• The secondary
mounted as soon as the primary one is mounted.
Note: The NDAS Device Manager automatically recognizes the mode of the
primary and secondary
on additional PCs. Only the primary
to be mounted.
Note: You can only mount the primary
and thus the combination – if you have also registered the secondary
DataStation maxi z.ul

4.5) Canceling a TrekStor

to a combination.
Note: To uncouple a combination, it must be unmounted from all PCs.
NOTE: Back up all data before canceling a coupling. When uncoupling, ALL
data on ALL associated hard disks is irrevocably lost.
DataStation maxi z.ul
• Secondary
unmounted as soon as the primary
unmounted.
Note: For more information on unmounting the
maxi z.ul
, please read section 3.7 "U
• Open the NDAS coupling manager on a PC on which all
DataStation maxi z.ul
• Select the combination of the coupled
and click on "U
will be uncoupled into unmounted
The uncoupled
NDAS Device Manager.
• Before you can use the uncoupled
DataStation maxi z.ul
again, all
mounted and formatted. Please also read sections 3.4 "M
T S D S
REK TOR ATA TATION MAXI Z
. " on this topic.
MAXI Z UL
DataStation maxi z.ul
DataStation maxi z.ul
DataStation maxi z.ul
". All associated
NCOUPLE
DataStation maxi z.ul
. " and 5.2 "F
UL
DataStation maxi z.ul

coupled to a combination,

must be mounted.
is automatically
DataStation maxi z.ul
DataStation maxi z.ul
on your PC.
are automatically
DataStation maxi z.ul
DataStation
T
NMOUNTING THE REK
of the combination are registered.
DataStation maxi z.ul
DataStation maxi z.ul
DataStation maxi z.ul
are also visible in the
DataStation maxi z.ul
must be individually
ORMATTING THE
– 45 – – 45 –
if they are mounted
needs
coupled
S D S
TOR ATA TATION MAXI Z
OUNTING THE
T S D S
REK TOR ATA TATION
–
is
. ".
UL
.
EN