Requirements; Setting Up The Coupling Mode; Datastation Maxi Z.ul Datastation Maxi Z.ul - TrekStor DataStation maxi z.ul Handbuch

4.2) Requirements

Note: The "A
GGREGATION
under Windows® 2000 / XP and Mac® OS X from version 10.3.
• In order to set up one of the 3 coupling modes for the
DataStation maxi z.ul
(KEY) for all of the affected drives. You can do this in the "NDAS D
M " under the "P
ANAGER
• The drives cannot be operated in 2 different modes at the same time.
DataStation maxi z.ul
• Unmount all
coupled, on all of the PCs in your network.
• Other users can re-mount the coupled
after the coupling has been set up and the
has been partitioned and formatted.
Note: In the "M
IRRORING
DataStation maxi z.ul
secondary
or greater than the primary

4.3) Setting up the coupling mode

NOTE: Back up all the data on your hard disk before using your hard disk
in a coupling mode. When setting up a coupling mode, ALL data on ALL
associated hard disks are irrevocably lost.
" Ë "P
• Click on "S
TART
• Click on the "C
coupling mode. Then click on the "N
• Select from the different coupling modes and the number of drives to
be coupled.
" and "M " coupling modes are only supported
IRRORING
" menu item of the respective device.
ROPERTIES
" and "S " coupling modes, the capacity of the
TRIPE
DataStation maxi z.ul
" Ë "NDAS
ROGRAMS
" button to start the Assistant for setting up a
OUPLE
, you must have entered the write key
, which are to be
DataStation maxi z.ul
DataStation maxi z.ul
must be at least the same as
" Ë "NDAS
SOFTWARE
" button.
EXT
– 43 – – 43 –
EVICE
.
".
COUPLING MANAGER
EN