TrekStor DataStation maxi z.ul Handbuch Seite 44

• In the following window, select the
that you would like to couple from the left-hand box.
• Click on the "A
located on the right-hand side.
Note: You will see the total capacity of the coupled combination displayed
in the same window.
• When coupling is complete, click on the "F
Note: If you have marked the wrong
for coupling, right-click on the
uncoupled in the dialog box of the NDAS coupling manager. Select
"C
ONVERT TO INDEPENDENT DRIVE
DataStation maxi z.ul
Note: In the "M
maxi z.ul
maxi z.ul
• Before you can use the newly coupled
the memory must be partitioned and formatted. Please also read
Section 5.1 regarding: "P
section 5.2: "F
EN
Note: Before you can format / partition a
you must first mount it.
" button until all of the drives to be coupled are
DD
DataStation maxi z.ul
" in the context menu to uncouple the respective
" coupling mode (RAID1), a
IRRORING
can only be mirrored on another
with greater or at least the same size capacity.
ARTITIONING THE
T S
ORMATTING THE REK
DataStation maxi z.ul
" button.
INISH
DataStation maxi z.ul
.
DataStation
DataStation
DataStation maxi z.ul
T S D
REK TOR ATA
D S
TOR ATA TATION MAXI Z
DataStation maxi z.ul
– 44 – – 44 –
to be
S . " and
TATION MAXI Z UL
. ".
UL
,
,