Werbung
72
Changing the Program
In case you would like to change the wash
program while the dishwasher is in operation,
make the following steps:
•
Slightly open the door with all necessary
precautions.
As soon as the washing arms have
stopped moving, you can open the door
completely,
•
Press and keep the button program setting
7 longer than for three seconds. Now use
the same button to select a required wash
program,
•
The selected program is indicated as the
symbol on the panel 1 2 .
•
Close the door with some force to ensure it
is closed properly.
You can hear a click which indicates that the door
is tightly closed.
Some seconds later the dishwasher begins a
wash cycle.
Wash cycle ending
At the end of a wash cycle for 8 seconds the
buzzer produces an acoustical signal.
Open the door. Press the main switch 6 to switch
off the dishwasher.
Wait a few minutes before you start to reload the
dishwasher: the dishes will get dry and not so hot.
EN
Werbung
