56
Changing the Program
In case you would like to change the wash
program while the dishwasher is in operation,
make the following steps:
•
Slightly open the door with all necessary
precautions. As soon as the washing arms
have stopped moving, you can open the
door completely,
•
Touch and keep the button 6 (ON / OFF)
longer than two seconds. It cancels the
active program;
•
To select a new wash cycle, use the button
5 (M EN U );
•
With buttons 3 (+), 2 (–) choose a
necessary program;
•
Confirm that program by touching the
button 4 (ОК);
•
If it will be selected some inactive function
for that mode, the buzzer will ring two
times.
•
Close the door with some force to ensure it
is closed properly.
Some seconds later the dishwasher begins a
wash cycle.
Wash cycle ending
At the end of a wash cycle for 8 seconds the
buzzer produces an acoustical signal.
Open the door. Press the button 6 (ON / OFF) to
switch off the dishwasher.
Wait a few minutes before you start to reload the
dishwasher: the dishes will get dry and not so hot.
EN