Werbung
52
Selecting a washing program
Before the beginning of a wash cycle:
•
Draw out the lower and the upper basket,
load the dishes and push them back. It is
advisable first to load the lower basket
basket, then the upper one,
•
Fill in a detergent dispenser.
Caution!
Load
utensils.
•
Connect the electric connection and press
the button 6 (ON / OFF), the dishwasher
will enter Standby phase, if button 4 (ОК)
is pressed at that time, the machine will
run the Normal program according to the
default factory settings.
•
Touch the button 5 (M EN U ) to select an
appropriate washing cycle, delay time, 3
in 1 option and language by switching to
the corresponding menu interface and
moving right or left with buttons 3 (+) и 2
(–).
•
Touch the button 4 (ОК) to confirm the
chosen settings.
•
Close the door with some force, to ensure
it is closed properly. You can hear a click
which indicates that the door is tightly
closed.
10 seconds later the dishwasher begins a wash
cycle.
If the door is open during the washing, the
dishwasher will pause; the buzzer will ring once
every minute. After closing the door the washing
cycle will start after 10 seconds.
When the wash cycle finishes, the buzzer rings for
8 seconds and the dishwasher enter off condition
(if a cycle with delay time ends, the buzzer will not
ring).
EN
only
dishwasher
safe
Werbung
