Werbung
Anhang D
D.1 Fehlermeldungen des SCALANCE X300 / X400
Meldungen zur Information über ein auftretendes Ereignis
Die nachfolgenden Meldungen dienen Ihnen zur Information über Ereignisse, die nicht in
direktem Zusammenhang zu einem Fehlerzustand (Fehler-LED) stehen:
• User entry: <Benutzereingabe>
• Unknown command <Befehl> for <Protokollname> protocol received.
• Device is configured to ring <off | ARD | HRP client | MRP client | HRP manager | MRP manager>.
• Standby function <Master | Slave>.
• Observer started.
• Observer stopped.
• Observer contacted Redundancy Manager <MAC-Adresse>.
• Standby is waiting for <partner | observer>.
• Standby <partner | observer> connected to <master | slave> <MAC-Adresse> <Portnummer>.
• Standby <partner | observer> lost connection to <master | slave> <MAC-Adresse>
<Portnummer>.
• Port <Portnummer> is isolated ring port.
• Port <Portnummer> is static ring port.
• No SMTP connection to mail server.
Server IP address <IP-Adresse> TCP port <TCP-Portnummer>.
• No SMTP application found.
Server IP address <IP-Adresse> TCP port <TCP-Portnummer>.
• SMTP (E-Mail) connection aborted. Server IP address <IP-Adresse>.
• Unable to send message to syslog server. Please check syslog socket configuration.
• Connected to syslog server.
• SNMP: Authentification failure.
• R)STP: new root bridge detected.
• (R)STP: topology change detected.
• Unable to send E-Mail(s). Please check IP configuration.
• Unable to send trap(s). Please check IP configuration.
• Failure reply code <Fehlercode> from SMTP server.
• Restart requested.
• No C-PLUG found. Internal flash memory used.
• An empty C-PLUG was found.
• C-PLUG format request.
• A filled C-PLUG was found.
• A corrupted C-PLUG was found.
• C-PLUG removed at runtime.
408
SCALANCE X-300/X408-2 V4.1.7 / SCALANCE X414-3E V3.10.2
Projektierungshandbuch, 05/2023, C79000-G8900-C187-34
Werbung
