Werbung
Verfügbare Sprachen
Verfügbare Sprachen
After cleaning, reassemble them according the instructions.
• Only use the meat probe recommended for this oven.
• Do not use a steam cleaner for cleaning operations.
IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITHOUT PLUG:
• THE APPLIANCE MUST NOT BE CONNECTED TO THE POWER SOURCE
USING PLUG OR SOCKETS, BUT MUST BE DIRECTLY CONNECTED TO THE
SUPPLY MAINS. The connection to the power source must be carried
out by a suitably qualified professional. In order to have an installation
compliant to the current safety legislation the oven must be connected
only placing an omnipolar breaker, with contact separation compliant to
the requirements for overvoltage category III, between the appliance
and the power source. The omnipolar breaker must bear the maximum
connected load and must be in line with current legislation. The yellow-
green earth cable should not be interrupted by the breaker. The
omnipolar breaker used for the connection must be easily accessible
when the appliance is installed.
• The connection to the power source must be carried out by a suitably
qualified professional considering the polarity of the oven and of the
power source.
• The disconnection must be achieved incorporating a switch in the
fixed wiring in accordance with the wiring rules
IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITH PLUG:
• The socket must be suitable for the load indicated on the tag and must
have ground contact connected and in operation. The earth conductor
is yellow-green in colour. This operation should be carried out by a
suitably qualified professional. ln case of incompatibility between the
socket and the appliance plug, ask a qualified electrician to substitute
the socket with another suitable type. The plug and the socket must be
conformed to the current norms of the installation country. Connection
to the power source can also be made by placing an omnipolar breaker,
with contact separation compliant to the requirements for overvoltage
category III, between the appliance and the power source that can bear
EN 19
Werbung
