Batavus E-go Bedienungsanleitung Seite 33

User Manual
4.2 Charge the battery pack
1. Connect the charger (A) to the mains
voltage.
2. Connect the plug (B) of the charger to
the contact point of the battery pack
(C).
3. When you charge, the light (D) is red.
When the battery pack is fully charged
the light turns green. The charge is
stopped automatically after 24 hours.
The light on the charger remains
green.
A full charge will take about 4,5
hours.
The battery pack can be
charged both in and outside the
bicycle.
When placing back, pay
attention to the contact points of
the docking station (E).
33
31