Hohem iSteady M6 Benutzerhandbuch Seite 8

Quick Switch to Portrait Mode
Switch to the portrait mode by rotating the handle as shown in the image below and
then hold the gimbal like a flashlight.
After switching to portrait mode in this way, the joystick will only allow your camera to
move left or right. Note that the gimbal should be held horizontally when in quick
portrait mode; it is not available in POV mode.
Powering On & Standby
Press and hold the power button for three seconds to power on or off the
•
gimbal.
When powered on:
•
o Press once to wake up the gimbal.
o Press twice to enter the standby mode.
Press the trigger four times to enter the ultra-wide angle shot mode. The roll motor will
move in front of the phone screen to offer an unobscured view.
8