Hohem iSteady M6 Benutzerhandbuch Seite 10

Note: It is completely normal for the magnetic alignment to become hot when the fill
light is in use and hence, it is advisable NOT to make a direct contact with the hot
alignment, especially the metallic part.
How to make AI vision positioning adjustments?
If the framed subject cannot be centred on the phone screen, or you want to customize
the AI vision position to be tracked:
Make sure the gimbal and AI vision sensors are on.
•
Make the "
•
quickly blink in green colour.
Move in front of the screen until you find the preferred position to be tracked.
•
Make the "
•
(the indicator will stop flashing).
How to Use the Gimbal
Features of the Gimbal
" gestures towards the AI vision sensor and the indicator light will
" gesture to lock the position and create the ideal composition
Power button
Press and hold for three seconds to power on or off.
When powered on, press once to wake up the gimbal,
or press twice to enter the standby mode.
M button
Press once to switch between gimbal modes (PF / PTF /
L / POV).
Press three times to enter "ICP" Inception mode / 360°
infinite spin shot. Press the trigger twice to recentre the
gimbal.
Press five times to perform auto-calibration.
Press seven times to remote control pairing.
Press nine times to clear the paired remote control.
10