Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If two coolers are to be
C
installed side by side,
there should be at least
4 cm distance between
them.
3.2 Installing the
plastic wedges
Plastic wedges are used to create
the distance for the air circulation
between the product and the rear
wall. Insert the 2 plastic wedges
onto the rear ventilation cover as
illustrated in the figure. To install
the wedges, remove the screws
on the product and use the screws
given in the same pouch with the
wedges.
14
The condenser of your appliance
is located on the back as shown
below. In order to achieve better
energy efficiency with lower
energy consumption, please pull
the condenser towards yourself
as illustrated in picture below.
The condenser position will be
fixed firmly by means of locking
mechanisim of the top holders on
each side.
* OPTIONAL
v
Werbung
