Silvercrest SSH 600 A1 Bedienungsanleitung Seite 87

Setting the temperature
You can set a temperature range from 6° Celsius to 32° Celsius on
the fan heater.
♦ Press the button 1 to turn on the fan heater. The factory
preset temperature (
on the display 3.
♦ Press the
ature in steps of 1° Celsius.
♦ Press the
ture in steps of 1° Celsius.
Note: The fan heater only starts heating when the room tem-
perature falls below the set temperature value.
As soon as the room temperature has reached the set temperature
value, the appliance stops heating until the room temperature
drops below the set temperature value again.
│ GB │ MT
■ 84
) or the last-used temperature appears
button 7, button repeatedly to increase the temper-
button 2, button repeatedly to reduce the tempera-
SSH 600 B2