Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Command Not Confirmed; Duty Cycle - HomeMatic HmIP-MOD-HO Installations- Und Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Troubleshooting

(A) lights up green. The device is now ready for use.
If the device LED lights up red, try again.
Please select, in which application you would like
to use the device.
Allocate the device to a room and give the device
a name.
6
Troubleshooting
6.1

Command not confirmed

If at least one receiver does not confirm a command, the
device LED (A) lights up red at the end of the failed trans-
mission process. The failed transmission may be caused
by radio interference (see "8 General information about
radio operation" on page 33). The failed transmission
may also be caused by the following:
Receiver cannot be reached.
Receiver is unable to execute the command (load
failure, mechanical blockade, etc.).
Receiver is defective.
6.2

Duty cycle

The duty cycle is a legally regulated limit of the transmis-
sion time of devices in the 868 MHz range. The aim of
this regulation is to safeguard the operation of all devices
working in the 868 MHz range.
In the 868 MHz frequency range we use, the maximum
transmission time of any device is 1% of an hour (i.e. 36
30

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis