HomeMatic HmIP-MOD-HO Installations- Und Bedienungsanleitung Seite 29

You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2/CCU3. For detailed information, refer to the
Homematic IP User Guide, available for download
in the download area of www.homematic-ip.com.
To integrate the module into your system and enable it to
communicate with other Homematic IP devices, it has to
be connected to your Homematic IP Access Point first.
To connect the module, proceed as follows:
• Open the Homematic IP app on your smartphone.
Select the menu item "Teach-in device".
•
• After connecting the module to the power sup-
ply, the teach-in mode remains activated for 3
minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (A)
briefly (see figure 7).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.
• Wait until the connection is completed.
• If the connection was successful, the device LED
Start-up
29