ergoline PRESTIGE 1600 HYBRID PERFORMANCE LED Gebrauchsanweisung Seite 154

Cleaning and maintenance
62/82
– Remove the screws and then remove the lamp cover.
The facial tanner's UV low pressure lamps must be removed first so that the
UV high pressure lamps can be changed.
– Remove the lamps.
– Remove the ninth low pressure lamp in the canopy vertically so that you
can access the facial tanner's low pressure lamp starters.
Replacing lamps:
UV low pressure lamps: see page 56.
UV high pressure lamps and filter panels: see page 58.
Replacing starters: see page 57.
Changing the chip card: see page 55.
The assembly is the same process in reverse order.
When assembling the device please note:
– Support the canopy panel with one hand so that it does not fall down.
– Re-lock the locks: first the lock in the middle, then the outer locks.