Herunterladen Diese Seite drucken

Swiss Pro+ SP-DFRY5L Bedienungsanleitung Seite 6

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
AFTER THE FOOD IS FRIED:
1.
Make sure to turn the temperature control knob to the OFF position and
unplug the deep fryer.
2.
Once food is done cooking, remove the lid, and hang the basket on the hook
and let excessive oil drip into the oil pot.
Warning: Removing the lid will release hot steam. Take extreme care
when handling. Keep face and bare skin clear of the steam release.
3.
Take out the basket and place the food on paper towels to absorb excess oil.
Do not touch the basket while it is still hot. Always use the handle.
4.
After the excess oil has drained, place the food on a paper towel lined
baking sheet to allow any remaining oil to drain away.
5.
Place the basket into the deep fryer.
6.
Do not move the deep fryer until it is cooled entirely.
7.
Unplug the power cord and store away.
CLEANING THE DEEP FRYER
1.
Remove the lid and basket.
WARNING: Before cleaning the deep fryer, make sure that the mains plug
is unplugged, that the appliance and the oil have cooled down completely.
Oil retains its temperature for a long period after use. Do not attempt to
carry or move the deep fryer while the oil is hot.
2.
Wait for the fryer to cool, lift out the Control Box Assembly & Heating element.
3.
Remove the oil pot and pour out the oil. It is recommended to filter the oil after
each use if you are to re-use the oil again.
4.
After removing the oil pot, the fryer can be divided into several separate
assemblies to clean.
5.
The oil pot and the body can immerse into water to clean.
6.
The lid can be washed in the dishwasher to clean or submerged in washing-up
liquid and then rinsed with water to clean.
7.
The control box and heating element should be wiped clean with absorbent
kitchen paper. Then use a damp cloth and mild soap to clean.
..
WARNING: Do not immerse the Control Box & Heating Element into water
to clean.
8.
Dry thoroughly all parts.
Note: Do not use abrasive scrubbing brushes or chemical cleaners to
clean the unit.
Swiss Pro B.V.
Fazantendreef 25, 8251 JR Dronten, NL

Werbung

loading