Befestigung der Gehäuseteilstücke
Gehäusedeckel entfernen.
Abdeckplatte Q abschrauben.
Schraube S
lösen.
S
18
Detach end cap and cover
plate Q.
Remove screw S
.
S
Mounting the Housing Sections
Spanneinrichtung herausnehmen.
Anschlagplatte K
heraus-
A
schieben. Endstück an Gehäuse-
teilstück aufstecken, ausrichten
und anschrauben.
Pull out the tensioning device.
Slide off stop plate K
. Attach the
A
end section to the housing
section, align and screw down.