Bosch 0 611 917 100 Originalbetriebsanleitung Seite 22

22 | English
Smartphone symbol (21) Meaning/cause
– Further information can be found on a mobile device if it is connected via Bluetooth® wireless
technology.
Temperature indicator (22) Meaning/cause
Yellow Operating temperature of the battery or the
power tool has significantly increased, per-
formance is reduced
Red Operating temperature of the battery or the
power tool has been exceeded, power tool
switches itself off as a precautionary measure
Selecting the working mode
Press the (19) button for selecting the working mode re-
peatedly until the working mode you require lights up.
Working mode (18) indic- Functions
ator
Auto working mode: Fast, controlled run-up up to maximum power
lights up
– "Hammer drilling" operating mode (Electronic Precision Control soft start): Fast, con-
– Rapid Shut-off (KickBack Control) active
– "Chiselling" operating mode (Adaptive Speed Control soft start): Fast, controlled run-up up
Favorite working mode: Individual configuration via smartphone app (only 3 611 J17 0..
lights up
in combination with the Bluetooth® Low Energy module GCY 42)
The following settings are preconfigured:
– "Hammer drilling" operating mode (Electronic Precision Control soft start): Controlled run-
– Rapid Shut-off (KickBack Control) active
– "Chiselling" operating mode (Adaptive Speed Control soft start): Fastest possible run-up
Soft working mode: Reduced power for processing sensitive materials
lights up
– "Hammer drilling" operating mode (Electronic Precision Control soft start): Slow, strictly
– Rapid Shut-off (KickBack Control) active
– "Chiselling" operating mode (Adaptive Speed Control soft start): Slow, strictly controlled
Connectivity functions
In conjunction with the Bluetooth® Low Energy Module
GCY 42, the following connectivity functions are available
for the power tool:
– Registration and personalisation
– Status check, output of warning messages
– General information and settings
– Management
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 42.
Practical Advice
With the Bluetooth® Low Energy Module GCY 42, the
u
power tool is equipped with a radio interface. Local
1 609 92A 88X | (24.10.2022)
Note: The functions are preset in Auto and Soft work
modes. In Favorite working mode, the preset functions can
be configured via a smartphone app.
trolled run-up up to maximum power
to maximum power
up up to reduced, medium power
up to maximum power
controlled run-up up to reduced, low power
run-up up to reduced power
u
Note: The cover (15) can only be closed securely if the
Bluetooth® Low Energy Module GCY 42 and the coin cell are
in the power tool.
– To deactivate the Bluetooth® Low Energy Module
– Close the cover (15) to prevent dirt from getting in.
Solution
Leave the power tool to cool down or replace
overheated battery
Leave the power tool to cool down or replace
overheated battery
operating restrictions, e.g. in aircraft or hospitals,
must be observed.
In areas in which the Bluetooth® wireless technology
must not be used, the Bluetooth® Low Energy Module
GCY 42 and the coin cell must be removed.
GCY 42, turn the coin cell over or place a means of insula-
tion between the coin cell and Bluetooth® Low Energy
Module GCY 42.
Bosch Power Tools