Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Make sure that the power cable or extension
cables are not damaged by running over,
pinching, dragging or similar. Protect the
power cable from heat, oil, and sharp edges.
All current-conducting parts in the working
area must be protected against jet water.
The appliance may only be connected to an
electrical supply which has been installed in
accordance with IEC 60364.
The appliance may only be connected to al-
ternating current. The voltage must corre-
spond with the type plate on the appliance.
For safety reasons, we recommend that you
operate the appliance only via an earth-leak-
age circuit breaker (max. 30 mA).
Cleaning operations which produce oily
waste water, e.g. engine washes, underbody
washes, may only be carried out using wash-
ing stations equipped with an oil separator.
Safety Devices
CAUTION
Safety devices protect the user and must not be
modified or bypassed.
Power switch
The appliance switch prevents unintentional op-
eration of the appliance.
Lock trigger gun
This lock locks the lever of the trigger gun and
prevents the inadvertent start of the appliance.
Overflow valve with pressure switch
The overflow valve prevents the permissible
working pressure from being exceeded.
If the lever on the trigger gun is released the
pressure switch turns off the pump, the high
pressure jet is stopped. If the lever is pulled the
pump is turned on again.
Prerequisites for the appliance's
stability
CAUTION
Create stability for the appliance prior to all work
on or with the appliance to prevent accidents or
damage.
–
The stability of the appliance is warranted
when it is placed onto an even surface.
Scope of delivery
The scope of delivery of your appliance is illus-
trated on the packaging. Check the contents of
the appliance for completeness when unpack-
ing.
In the event of missing accessories or any trans-
port damage, please contact your dealer.
Description of the Appliance
Illustrations on Page 2
1
Quick coupling for high pressure hose
2
High pressure connection
3
Appliance switch "0/OFF"/ „I/ON"
4
Storage hook for high pressure hose and
mains connection cable
5
Transport handle
6
Storage for spray lance
7
Storage for trigger gun
8
Water connection with integrated sieve
9
Detergent suction hose (with sieve)
10 Detergent Tank
11 Coupling element for water connection
12 Mains cable with mains plug
13 Bearing wheel
14 Trigger gun
15 Lock trigger gun
16 Key to detach the high pressure hose from
the trigger gun
17 High pressure hose
18 Washing brush
19 Spray lance with Dirtblaster
20 Spray lance with pressure regulation (Vario
Power)
Special accessories
Special accessories expand the possibilities of
using your appliance. Please contact your
KÄRCHER dealer for further information.
Mount loose parts delivered with appliance prior
to start-up.
Illustrations on Page 3
Illustration
Insert the transport wheels and lock them.
Illustration
Attach the transport handle /carrying handle.
Illustration
Fasten the quick coupling for the high pres-
sure hose to the high pressure connection.
EN
– 6
Operation
Before Startup
13
Werbung
