Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Precautions
This product complies with the requirements of the following European
Community Directives: 2004/108/EC (Electromagnetic Compatibility) and
2006/95/EC (Low Voltage) as amended by 2004/22/EC (CE-Marking).
To ensure safe operation of the equipment and eliminate the danger of serious
injury due to short-circuits (arcing), the following safety precautions must be
observed. Damages resulting from failure to observe these safety precautions
are exempt from any legal claims whatever.
* Prior to connection of the equipment to the mains outlet, check that the
available mains voltage correspond to the voltage setting of the equipment.
* Connect the mains plug of the equipment only to a mains outlet with earth
connection.
* Do not place the equipment on damp or wet surfaces.
* Do not subject the equipment to direct sunlight or extreme temperatures,
humidity or dampness.
* Replace a defective fuse only with a fuse of the original rating. Never short-
circuit fuse or fuse holding.
* Do not exceed the maximum permissible input ratings.
* To avoid electric shock, do not operate this product in wet or damp
conditions. Conduct measuring works only in dry clothing and rubber shoes,
i. e. on isolating mats.
* Comply with the warning labels and other info on the equipment.
* Do not cover the ventilations slots of the cabinet to ensure that air is able to
circulate freely inside.
* Do not insert metal objects into the equipment by the way of ventilation slots
* Do not place water-filled containers on the equipment (danger of short-
circuit in case of knockover of the container)
* Do not operate the equipment near strong magnetic fields (motors,
transformers etc.).
* Do not subject the equipment to shocks or strong vibrations.
* Keep hot soldering irons or guns away from the equipment.
* Allow the equipment to stabilize at room temperature before taking up
measurement (important for exact measurements).
* Do not modify the equipment in any way
* Do not operate the meter before the cabinet has been closed and screwed
safely as terminal can carry voltage.
* Periodically wipe the cabinet with a damp cloth and mid detergent. Do not
use abrasives or solvents.
-10-
Werbung
