Maintenance / Fault Finding; Fault Detection And Elimination; Optional Accessories - HEYLO PF 1400 Bedienungsanleitung

(9) Maintenance / fault finding

WARNING: Danger of electric shock !
The unit has to be disconnected from the mains before maintenance work is carried out. Electrical
components must not be cleaned with a water hose or pressure washer because water may enter the
electric unit and may cause an electric shock.
When disassembling component parts, please tighten the screws by hand in order to prevent
damage to the thread !
WARNING: Contamination hazard
Always wear the recommended protective equipment and the breathing apparatus when removing or
replacing the filter as well as when cleaning the HEPA filter. Prior to transport, the unit has to be
cleaned completely or as an alternative has to be packed air-tight.

Fault detection and elimination

Problem
The unit is not
operational.
Change of filter
indicator is lit
Impeller is not
operational.

(10) Optional accessories

Description
Pre-filter "coarse dust" G4 (set of 5)
Pre-filter - activated carbon
Main filter - suspended matter (HEPA) H14
Main filter fine dust F9, dust class M
Main filter - activated carbon filter
Pre-filter cassette (suction side with hose connection socket diam. 205 mm)
Hose connection socket (outlet side diam. 205 mm)
Air hose diam. 205 mm, length 7.6 m
Telescopic rod - length 3.6 m
Telescopic rod - length 6 m
Dust protection door DCD 3.0
Potential cause
The unit has no power.
The unit has not been
switched on.
Main filter is soiled.
Air inlet is blocked.
Fan is blocked.
Connect the unit to another socket;
check whether the socket is live.
Switch the unit on.
Change filter; cf. chapter on filter.
Remove kinks in the hose or remove
the hose.
Remove blockage.
22
Solution
HEYLO Art. No.
1 110 925
1 110 914
1 110 854
1 110 853
1 110 855
1 200 076
1 200 074
1 250 065
1 110 940
1 110 941
1 110 975
EN