Kenwood KMM-BT505DAB Bedienungsanleitung Seite 9

BASICS
Faceplate
Volume knob
Detach button
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information
Display window
Lights up when Bluetooth connection
is established. (Page 14)
How to reset
Reset the unit within
5 seconds after detaching
the faceplate.
On the faceplate
Press B SRC.
• Press and hold to turn off the power.
Turn the volume knob.
Press B SRC repeatedly.
Press DISP repeatedly. (Page 28)
GETTING STARTED
1
Select the display language and cancel the
demonstration
When you turn on the power for the first time (or [FACTORY RESET] is
set to [YES], see page 5), the display shows: "SEL LANGUAGE"
"PRESS" "VOLUME KNOB"
1 Turn the volume knob to select [EN] (English), [RU] (Russian),
[SP] (Spanish) or [FR] (French), then press the knob.
[EN] is selected for the initial setup.
Then, (for only) the display shows: "CANCEL
DEMO" "PRESS" "VOLUME KNOB".
2
Press the volume knob again.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
Then, the display shows the selected crossover type: "2-WAY
X ' OVER" or "3-WAY X ' OVER"
• To change the crossover type, see "Change the crossover type" on
page 5.
3
ENGLISH