Connections - Yamaha A-S2100 Bedienungsanleitung

Connections

Speakers A
(R channel)
+ -
+ -
Speakers B
(R channel)
Notes
• Do not let the bare speaker wires touch each other or do not let
them touch any metal part of this unit. This could damage this
unit and/or the speakers.
• All connections must be correct: L (left) to L, R (right) to R,
"+" to "+", and "–" to "–". If the connections are faulty, no
sound will be heard from the speakers, and if the polarity of the
speaker connections is incorrect, the sound will be unnatural
and lack bass. Also, refer to the owner's manual for each of
your components.
16
En
CD player or network
player with XLR jacks
Tuner
SPEAKERS R CH
+ A
+
B
PHONO
A OR B: 4 MIN./SPEAKER A+B:8 MIN. /SPEAKER
• Use RCA unbalanced cables to connect other components
except speakers. Use XLR balanced cables to connect a CD
player or network player with XLR balanced output jacks to the
BAL jacks of this unit.
• Connect your turntable to the GND terminal to reduce noise in
the signal. However, you may hear less noise without the
connection to the GND terminal for some turntables.
INPUT
ATTENUATOR
BYPASS ATT. NORMAL
(-6dB)
R L
BAL
R L R L R
TUNER CD
R L
GND
Ground
Turntable
CD player with
RCA jacks
PHASE
INV.
L
LINE1
BD player, etc.