Parkside PASA 20-Li B2 Originalbetriebsanleitung Seite 8

Technical specifications
Cordless Garden Saw PASA 20-Li B2
Rated voltage
Rated idle stroke rate
Stroke length
Max. cut length
Saw blade holder
Battery PAP 20 B3*
Type
Rated voltage
Capacity
Cells
High-speed battery charger PLG 20 C3*
INPUT
Rated voltage
Rated power
consumption
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
* BATTERY AND CHARGER ARE NOT SUPPLIED
Noise emission values
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool at the working location is typically
as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
PASA 20-Li B2
20 V (DC)
n 0–2700 rpm
0
20 mm
60 mm (with branch claw)
90 mm (without branch
claw)
½" (12.7 mm)
LITHIUM ION
20 V (DC)
4.0 Ah
10
230–240 V ∼ 50 Hz
(AC)
120 W
T3.15A
3.15 A
21.5 V (DC)
4.5 A
approx. 60 minutes
II / (double insulation)
L = 84.3 dB (A)
pA
K = 5 dB
pA
L = 95.3 dB (A)
WA
K = 5 dB
WA
Total vibration values (vector total of three directions)
determined in accordance with EN 62841:
Sawing chipboard
Uncertainty
Sawing wood beams
Uncertainty
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the power
tool is being used and, in particular, the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
► It is necessary to establish safety measures
to protect the operator based on an estima-
tion of the vibration load during actual use
(wherein all states of operation must be
included, e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
2
a = 7.845 m/s
h,B
K = 1.5 m/s 2
a = 9.154 m/s 2
h,WB
K = 1.5 m/s 2
GB │ IE │
3 ■