syr LEX Smart 5 Bedienung Und Wartung Seite 4

1. Safety instructions
1.1 Symbols
1.2 General safety instructions
Install and use only original spare parts and accessories that have been tested and approved by the manufacturer.
The manufacturer is not liable for damages caused by the use of non-original spare parts and accessories or
improper handling. Should these instructions not answer all your questions, please contact the manufacturer.
1.3 Safety instructions - Electricity
Any non-authorized work on the electric system is strictly forbidden as an electric shock can be lethal or cause
serious injuries!
Ensure that the socket is always readily accessible. If the cable of the device is damaged, replace it in order to
avoid any risk. Unplug the device prior to changing any setting in the electronic system. The apparatus is deli-
vered with a mains adapter.
1.4 Safety instructions - Salt
The residual regeneration salt will be fl ushed out of the regeneration tank along with the waste water, which
should not be used for watering fl owers or similar purposes. Observe the instructions in chapter „Installation site
requirements" to ensure perfect safety when draining the waste water and the salt.
1.5 Safety instructions - Temperature
Vent the water softening system right after the connection to the water mains to ensure perfect safety.
4
Danger to life and limb! Caution!
Important information regarding the correct operation of the device.
Observe strictly!
Prior to cleaning works on the device or close to it, always unplug the apparatus as water and
current form a lethal mixture!
Only qualifi ed installers are authorized to install the device.
The indicated salt quantities refer to salt tablets. When using industrial salt (salt pellets
or blocks) quantities may vary.
Danger of scalding! Load resistances may become hot in operation and should not be
touched.
Instructions for use and maintenance of LEX Smart Water Softeners