Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Instructions
Handling
Warning
•
Make sure that you read and understand the instructions for the main product to ensure that you know what personal
equipment to wear, what safety equipment to use and how to work in a safe mode.
Warning
•
Make sure the assembly area is firm, so the vacuum cleaner does not tip over. Risk of personal and material injury.
Warning
•
Risk of pinching when handling the toggle fastener.
Warning
•
The machine must not be used in environments where explosive gases may be present. Serious risk of explosion.
Service
Warning
•
Make sure the cord is unplugged when performing service or maintenance to the product.
Warning
•
Do not puncture the longopac bag. Risk of dust dispersion.
Warning
•
Dust can be spread when cleaning the device that can be dangerous to health. Accordingly, the user should wear
protective glasses, protective gloves, and a breathing mask conforming to protection class FFP3
Wear breathing mask
Function
The machine is intended for pre-separating dry, not combustible dust.
The pre-separator must be attached to a vacuum cleaner with right capacity. When the vacuum cleaner is started, the dust-
laden air is then sucked through the inlet valve at high speed via the suction hose. The air is slowed down by the cyclone and
coarse dust particles are separated out, partly by centrifugal force and partly by gravity. Air and finer particles then lift through
the tank and through the hoses attached to the vacuum cleaner.
The separated dust accumulates in the cyclone until the vacuum cleaner is switched off, when it drops through the bottom flap
into the plastic bag.
C 5500 is equipped with an earth cable. Attach this to the vacuum cleaner to avoid static discharges from the pre-separator.
Service
When cleaning and servicing the machine, disconnect the machine from the vacuum cleaner.
•
Avoid cleaning with high a pressure cleaner. If this is necessary, do not direct at the openings on the machine, especially
the opening for the cooling air.
•
Before moving the machine from the work area, the machine must be cleaned. Furthermore, the inlet must be locked using
the expanding plug attached.
•
All other equipment must be regarded as contaminated and be treated thereafter.
•
If possible, use a special suitable room.
•
Proper personnel protective equipment must be used.
•
After service, all parts which are contaminated must be correctly disposed of in plastic bags according to all regulations.
•
If the vacuum cleaner has to be used for other purposes, it is extremely important that the vacuum cleaner is cleaned, to
avoid the spread of hazardous dust.
Wear ear protection
Wear protective glasses
Werbung
