simu T5 AUTO Bedienungsanleitung Seite 2

GB T5 AUTO
S.A.S. au capital de 5 000 000
Installation
1
- Recommendations:
- The motor torque must be selected according to the shutter's characteristics. Do not oversize the operator.
- The use of automatic locking devices (VAR, VAS or EASYLINK) and stops on the final slat is mandatory in order to ensure proper working of the motor.
- To receive information regarding the compatibility of the motor and the roller shutter or/and accessories, contact the roller shutter manufacturer or SIMU
- Drilling of the tube:
- Assembly :
1
Wiring
2
PE
Blue
Brown
L
Black
N
Green/yellow
- 3 operators (max.) can be wired in parallel on one switch.
- The wiring has to be realized by trained people.
- The motor does not allow connection with an emergency power supply such as regulated power supply or power generating unit.
- The connector has to be assembled without damaging the contacts. The continuity of the earth connection must be ensured.
Power up of the operator
3
After the first two consecutive opening and closing of the shutter :
- The motor memorizes automatically the end limit ( up and down) positions.
- The "stop on obstacle" function is activated.
>>
- It is advised to carry out these two opening/closing cycles as soon as the product is installed.
- For any further information, please consult the SIMU
Cancelling the automatic settings
4
- In the case of a new installation with this operator, it is advised to reset the motor according to the following procedure:
>> >>
1 s 1 s
- Press 3 consecutive times, for 1s each time, on the UP key. The motor runs briefly at each press.
- Press 3 consecutive times on the DOWN key. The first two press for 1s (the motor runs briefly at each press) and the third press for 2s. The motor runs twice
in the same direction.
- Z.I. Les Giranaux - BP71 - 70103 Arc-Les-Gray CEDEX - RCS GRAY B 425 650 090 - SIRET 425 650 090 00011 - n° T.V.A CEE FR 87 425 650 090
55
48
T5 AUTO
230V-50Hz
Ø4,8 x 10
5
ACIER-STEEL-STAHL-ACERO-ACCIAIO
4
2
3
>>
technical leaflet "T5 AUTO".
®
>>
1 s
L1
20
4
L2
6 -10
15
20 - 25 - 35
Ø5 x 10
9910013
9910014
>>
1 s
Read carefully these instructions
A
T
(mm) (mm)
min.
47 486
47 508
47 660
2
3
1
>>
OK
>>
>> >>
1 s
5052442B
before any use.
.
®
4xØB /90
A
ØB L1 L2
(mm) (mm)
5 496 518
5 523 543
5 670 692
1
2
2
1
2
>>
3
>>
>>
2 s
1 / 1