Siemens SIMATIC IPC847D Produktinformation Seite 24

Table 3
Plug-in scenarios
Slot 6
Free
Free
Free
Occupied
Occupied
Occupied
Occupied
BIOS Setup settings
Change to section 8.6.6 of the operating instructions.
The change is valid as of BIOS V19.01.07.
The default setting of the DisplayPort audio device has been changed from "Enabled" to "Disabled".
Note
You have to change the following BIOS setting to "Enabled" if you want to use the audio function of the DisplayPort monitor:
Advanced > Video Configuration > Internal Graphic Device > DPP Audio
Permitted mounting positions
Correction to sections 3.1.3, 1.2 and 3.3.6.5 of the operating instructions
Optional installation locations
The device can be mounted in control desks, switchboards and 19" rack systems, both horizontally and vertically.
Audio interfaces
Note
Figures in sections 1.2 and 3.3.6.5 of the operating instructions
The devices are supplied with monochrome black audio jacks as of May 2017.
24
Slot 7 Slot 8
Free Occupied
Occupied Free
Occupied Occupied
Free Free
Free Occupied
Occupied Free
Occupied Occupied
IRQ
Slot 6 Slot 7
/ /
/ 0x0A
/ 0x0A
0x0A /
0x0A /
0x0B 0x0A
0x0B 0x0A
Slot 8
0x05
/
0x05
/
0x05
/
0x05
SIMATIC IPC847D
A5E38018732-AD, 09/2017