Mill CUS1800MECWA Bedienungsanleitung Seite 5

millnorway.com
dropped on the floor is damaged in any other way caus-
ing it to malfunction.
• The cord must be repaired by the manufacturer or by
an expertif it has been damaged, to avoid dangerous
situations.
• Avoid using extension cords, which may overheat and
could possibly start a fire.
• Never cover the air vents on the heater. Avoid potential
fire hazards by making sure the air intakes are not
blocked or covered. The heater should be used in
rooms with normal flat floors.
• The heater should not be installed in close proximity to
flammable materials of any kind because there can
always be a risk of fire.
• The heater must never be used in rooms where gaso-
line, paint or other flammable liquids are stored, such as
in a garage.
• Never touch an electric heater with wet hands. The
heater should be installed so a person showering or
taking a bath cannot come into direct contact with it.
• Some parts of this product can become very hot and
cause burns. Particular attention has to be given where
children and vulnerable people are present.
• The heater must be switched off, the plug removed and
the heater must cool down before it is moved.
• Avoid overloading the mains (the circuit) where the
heater is connected. The heater may overload the
electrical circuit if other electrical devices are plugged
into the same socket outlet.
• Do not use this heater in small rooms when they are
occupied by persons not capable to leaving the room
on their own, unless constant supervision is provided.
3