Mill CUS1800MECWA Bedienungsanleitung Seite 7

millnorway.com
Specifications
Model
CUS1800MECWA
CUS1800MECW
CUS1800MECBA
Before first use
After unpacking the heater, check to make sure the product was not damaged during
transport. Contact the retailer or importer if you discover any visible damages to the
product.
Keep the outer packaging to transport the heater in the future. If you want to dispose
the packaging, make sure it is done properly. Keep plastic bags away from children.
First use
After turning on the heater for the first time or after an extended period without use,
the heater can produce a burnt odor for a short time. This is normal.
Please read all the instructions carefully before use. Save the instruction manual for
future use.
Attention! The heater is equipped with a tip-over switch which turns the heater
off when tipped over. When moving and/or tilting the heater you would hear a
sound that may sound like a loose part inside — this is the tip-over switch and
it is completely normal.
Description of heater
See figure 1 on separate illustration sheet
A With aluminium foot
1. Heat emission
2. Thermostat
3. Output selector
4. Legs (aluminium)
Parts for models with aluminium foot
See figure 2 on separate illustration sheet
• 8 screws (4 pre-mounted)
• 2 foot brackets
• 2 rails for the feet
Aluminium
Thermostat Color
Mechanical White
Mechanical
White
Mechanical
Black
B Without aluminium foot
1. Heat emission
2. Thermostat
3. Output selector
5
Amperage
foot
220-240V~, 50Hz
Yes
N o 220-240V~, 50Hz
Yes 220-240V~, 50Hz
Power (W)
1800
1800
1800
5