3.
Position the muffler correctly and slide it onto the outlet side of the stock Y-link pipe or in case of Akrapovic optional
Y-link pipe onto the outlet side of the Akrapovic Y-link pipe (F 37).
4.
Tighten the carbon-fiber clamp onto the stock chassis hanging bracket on the frame ; – use the spacer, bolt, washer
and nut supplied in the Akrapovic kit. Do not fully tighten. Make sure the additional parts from the Akrapovic kit are
correctly installed (F 38, 39, 40, 41, 42).
25 / 34
F 37
F 38