Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Box content
-
Treadmill
-
Tools for assembly
-
Lubricating oil
-
Instruction manual
3. ASSEMBLY
Step 1:
-
For this step, it is recommended that you are assisted by another person. Lift the control
panel as shown in figure 2.
1.
Secure the support bars with the tension knob. Fig. 2
2.
Use the screws, flat washers, and spring washers, as shown in figure 2, to fix the support
bars.
Step 2:
3.
Secure the handlebar with the screws and spring washers as shown in figure 3.
4.
Use the fixing knob, as shown in figure 4, to finish fixing the belt.
5.
Position the device holder as shown in figure 3.
6.
Put the safety key in position. If not in place, the treadmill will not work.
4. OPERATION
Fig. 4 key:
1. Start: press the START button to start training.
2. Stop: press the STOP button to stop training.
3. Programme: press this button to select the preset training programme mode (P01-P12).
4. Increase speed: use this button to increase the settings for each function and to increase
the running speed settings during interval training in the different training modes.
5. Decrease speed: use this button to decrease the settings for each function and to decrease
the running speed settings during interval training in the different training modes.
6. Mode: press the mode button to select different functions (TIME, DISTANCE or CALORIES)
to set personalised training targets using the manual mode.
7. Speed 2 km/h: with this button, you can directly access the speed 2 km/h.
8. Speed 4 km/h: with this button, you can directly access the speed 4 km/h.
9. Speed 6 km/h: with this button, you can directly access the speed 6 km/h.
10. Speed 8 km/h: with this button, you can directly access the speed 8 km/h.
11. Speed 10 km/h: with this button, you can directly access the speed 10 km/h.
DRUMFIT WAYHOME 1400 SPRINT
ENGLISH
59
Werbung
