cecotec CECOFRY FIREDOME 8000 PRO Bedienungsanleitung Seite 49

6. Please do not clean the heating tube.
7. Do not immerse the grill in a liquid such as water.
5. TROUBLESHOOTING
Fault Causes
You did not press the
power icon hard enough
and/or it is dirty.
Unable to
switch on the Plug not plugged in or
display power supply exhausted.
The fryer basket is not
correctly positioned.
Deteriorated
The fan does
ventilation wiring.
not work after
switching on
Power icon is not pressed.
the product
Printed
coupling.
Does not
Heating
heat up after
terminal falls off.
switching on
Power icon is not pressed.
The selected temperature
is too low.
Food does not
Cooking time is too short.
fry
There is too much food in
the basket.
Food is fried The food did not turn over
unevenly during cooking.
The basket is too full.
Food cannot
be cooked
The basket is not placed in
properly
the fryer.
Solutions
Press and hold the power icon for 1
second and/or wipe the touch panel.
Connect the plug or replace it.
Place the basket in the fryer to make
sure the switch is on.
internal
Contact the Cecotec Customer Service.
After parameter setting, press Start /
Pause.
circuit board
Contact the Cecotec Customer Service.
pipe wiring
Contact the Cecotec Customer Service.
After parameter setting, press Start /
Pause.
Adjust the temperature according to
the recipe.
Adjust the time according to the recipe.
Bake the food in batches.
Bake the food and turn it up and down.
Remove part of the ingredients.
Place it.
ENGLISH
CECOFRY FIREDOME 8000 PRO 49