Niceboy PARTY BOSS 2 200W Bedienungsanleitung Seite 16

REMOTE CONTROL
Before using the controller, open the bottom cover and insert
the included AAA batteries.
1. Mute: Option to mute in any mode.
2. Previous track
In USB/TF (Micro SD card) mode - previous track.
In Bluetooth connection mode - previous track.
In FM mode - Previous channel.
3. MODE: Short press to go to Bluetooth / AUX / USB / SD
mode.
Long press to mute the voice prompt
4. Recording function: In USB / SD mode, press „REC" button
to record songs to USB / Micro SD card.
5. Echo - Reduction of the echo effect.
6. BASS + / - Adjust the bass effect.
7. EQ function - EQ1 - Normal, EQ2- Rock, EQ3- Fashion, EQ4-
Classic,
EQ5- Country, EQ6- Jazz
8. Microphone volume + / -
9. POWER
10. Pause / Play
11. Next track
In USB / SD mode - next track
In BT mode - next track
In FM mode - next channel
12. Light mode switch: Short press to change the lighting mode
(LED 1 to LED 10) and turn off the light.
13. REPEAT: Repeat playback of a single song or a loop of a
song on USB / SD storage.
14. Playback of recording
15. Deletion of Record
16. Echo + Increase the echo effect.
17. Microphone Priority - If the button is on, it prioritizes the microphone by muting the music when
speaking into the microphone. When this switch is off, the volume of the played music remains
unchanged.
18. Treble + / - Setting the treble effect.
19. Master volume
20. Number buttons
In USB/TF (Micro SD card) mode to select songs.
In FM mode to select automatically stored stations.
BT MODE
1. After switching on, the speaker is automatically in BT mode. In case the speaker is in other mode,
it is necessary to put it in bluetooth mode by briefly pressing the MODE button (14). The BT pai-
ring mode is indicated on the display by a flashing BLUE sign.
2. Activate Bluetooth on your device. Then select „Niceboy PARTY Boss 2 200W" in the list of availab-
le devices.
3. The device connects to the speaker. Successful pairing will be announced by an acoustic prompt
and on the display the inscription BLUE lights up permanently.
4. After powering on again, the speaker will automatically connect to the last paired one device.
16